StorCase Technology 14-Bay 4U SCSI Ultra320 - Manual (Page 26)

InfoStation User Interface 17
InfoStation 14-Bay U320 User's Guide - Rev. A00 StorCase Technology, Inc.
Spin-Up Option Set-Up
The following steps show how to change the InfoStation drive bay spin-up option.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
NOTE: If the enclosure is already powered up, then the spin-up option will be
applied to the drive immediately after it has been inserted.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Bay Cfg.
3. Press ENTER so that display = SCSI ID.
4. Press DOWN until display = Spin up.
5. Press ENTER to change the spin-up option.
This is the current spin-up setting.
6. Press UP or DOWN to change the spin-up option.
7. Press ENTER to accept the change.