StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 18)

6 Installation
StorCase Technology, Inc. S10C100 User's Guide - Rev. A01
INSTALLATION
CAUTION: Remove ALL power from the InfoStation before installing the RAID Module.
The RAID Module contains NO USER SERVICEABLE PARTS inside the unit.
Warranty is VOID if module is opened. Refer ALL servicing to qualified
service personnel!
NOTES: The installation, configuration, and use of the InfoStation RAID Controller
Module for the StorCase InfoStation chassis requires a high level of
expertise and experience on the part of the user/integrator. Since there
are many configuration options and variables (ie. host platforms, host bus
adapters,applications, etc), only general guidelines will be discussed in
this User's Guide.
Refer to both the InfoStation User's Guide and Installation Guide for
additional operating and installation information. Also refer to the disk
manufacturer's documentation for information regarding the disks.
Installing the RAID Module into the InfoStation
Please refer to the InfoStation Installation Guide for information regarding the installation of
the RAID Module into the InfoStation.
RAID CHANNEL CONFIGURATIONS
NOTE: The installation, configuration, and use of the InfoStation RAID Controller
Module for the StorCase InfoStation chassis requires a high level of
expertise and experience on the part of the user/integrator. Since there
are many configuration options and variables (ie. host platforms, host bus
adapters,applications, etc), only general guidelines will be discussed in
this User's Guide.
CAUTION: Offset VHDCI cable connectors must be used for proper fit. Failure to use
proper cables may result in damage to the I/O VHDCI connectors on the
InfoStation I/O modules and RAID Module! RAID Controller "Kits" containing
external I/O cables are available; contact StorCase for further ordering
information.