StorCase Technology FC-to-SCSI Single & Dual RAID - Manual (Page 112)

FC-SCSI Dual RAID Module User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 99
5. Select the desired option and press Enter.
If not in Active-Active mode, the Initiator ID screen will display the current initiator ID
(Figure 62).
NOTE: Controller disk channel SCSI ID is factory set to ID7. StorCase does not recommend
changing the factory default Initiator ID(s). DO NOT configure any other devices to
ID7 on the disk channel, or the configuration will fail to operate!
Figure 61: Disable Domain Validation Screen
Figure 62: Initiator ID Screen