StorCase Technology RJR400 - Manual (Page 7)

RJR400 User’s Guide - Rev. C00 StorCase Technology, Inc.
6
Rear Panel
(Figure 3)
• DC Power Connectors: Standard 4-pin DC Power Connector to accept DC power.
NOTE: If using DC power, both DC power connectors must be provided with power
for proper operation.
• SATA Power Connectors: Alternative 15-pin SATA Power Connector to accept DC
power.
NOTE: If using SATA power, both SATA power connectors must be provided with
power for proper operation.
• I/O Connectors: The input/output connector provides a standard interface for all SATA
signals.
• Temperature Setting (JP1): Jumper set to 60 o C overtemperature (default).
• Reserved (JP3): Factory-reserved.
• Fan Speed: High (recommended) and low speed. Jumper is set to High (default).
NOTE: Fan speed feature supported by RJR400 Rev. C00 and up (rev. level can
be found on P/N label located on the unit).
• Cooling Fan: Fan provides enhanced heat dissipation (53.9 CFM).
Figure 3: Rear Panel
Temperature Setting
(JP1)
Reserved
(JP3)
SATA Power
Connectors
Fan
Speed
DC Power
Connectors
Cooling
Fan
I/O
Connectors