SurgeX SX-20NE-RT-AR - Manual (Page 16)

SX-20NE-RT-AR User Manual
Page 15
VI. Web Server
(continued)
• Action: Select the action to be triggered.
None AutoPing not used
Power On – Latch Upon triggering, AR will power on and remain so until
changed via web, telnet, or DxP.
Power On – Follow Upon triggering, AR will power on. When the ping
response returns, AR will power off.
Power Off – Latch Upon triggering, AR will power off and remain so until
changed via web, telnet, or DxP.
Power Off – Follow Upon triggering, AR will power off. When the ping
response returns, AR will power on.
Power Cycle Upon triggering, AR will cycle the power. AR will then
wait for (Ping Frequency x Fail Count) seconds; if the
response does not return, the power will be cycled
again. This will repeatedly continue until the ping
response returns or AutoPing is turned off. Ensure that
the AutoPing frequency is longer than the time
required to reboot the device.
Power Cycle - Once Upon triggering, AR will cycle power one time. It will
not cycle again automatically until the ping response
returns and is lost again.