SurgeX PF-420 - Manual (Page 2)

Line Connection
Connect the electrical service from the load side of the circuit breaker to the upper
terminal block as follows:

Live (Black) wire to the terminal labeled “LINE”
 Neutral (White) wire to the terminal labeled “NEUT”
 Ground (Green) wire to the terminal labeled “GRND”

Isolated Ground wire (if used) to the terminal labeled “ISO GND”
Load Connection
Connect the equipment circuit (load) to the lower terminal block as follows:
 Live (Black) wire to the terminal labeled “LOAD”
 Neutral (White) wire to the terminal labeled “NEUT”
 Ground (Green) wire to the terminal labeled “GRND”

Isolated Ground wire (if used) to the terminal labeled “ISO GND”
Indicator Light
There are four green indicator lights on the front of the unit, one for each circuit.
These green lights are Self-Test indicators that indicate power is applied to the unit
and also that the internal surge protection circuitry on each circuit is fully
functional.
9/2006