Gain control, Main power switch, Power cord – SVS PB12-NSD User Manual
Page 12: Connectivity & panel operations, Sv sound, llc
© 2011 Specialty Technologies, LLC
•
Call SVSound
™
877.626.5623
•
www.svsound.com
SV Sound, LLC
STA-400D Equipped Subs
Connectivity & Panel Operations
Gain Control
The Gain control effectively adjusts the output level (volume) of the subwoofer. The higher the gain control is
set (towards MAX) the louder the subwoofer will play. Please be aware that high Gain settings may cause the
STA-400D’s Limiter to engage during loud passages. See the discussion regarding the Limiter LED above for
more information.
Main Power Switch
Use this switch to apply power to the STA-400D amplifier.
Power Cord
Plug the power cord into a wall outlet. It is not recommended that the subwoofer be plugged into a conve-
nience outlet on the back of a AVR or pre/pro as they are not rated for the level of power required Do not use
extension cords to lengthen the cord.
Note the power receptacle also contains the main fuse for the amplifier.
12