SVS PC-2000 - Manual (Page 9)

Line Level Inputs
These inputs are used for line level connections to the subwoofer. For a single
mono connection to an A/V receiver, use the R/LFE input. For 2-channel
applications, use both the L and R inputs.
Line Level Outputs
These outputs are used in 2-channel applications to high pass the signal being
sent to the loudspeaker amplifier. The line level outputs feature a fixed 80 Hz
12 dB/octave high pass filter.
Main Power Switch
This switch turns the amplifier on and off. During normal operation, the main
power switch can be left on. It should be turned off during extended periods of
non-use, or when making signal connections to the subwoofer.
Power Cord Receptacle
The receptacle accepts the AC power cord.
Power Status Light
The power status light is located on the bottom right corner of the amplifier
panel on the back of the subwoofer. The light will illuminate blue when the
amplifier is on. The light will illuminate red when the amplifier is in standby
mode.
6
7
8
9
10
AMPLIFIER FEATURES & CONTROLS
7