Taser Axon-Body - Manual (Page 3)

3
What Is the AXON body System?
The AXON® body camera is a camera system incorporating an audio and video recording device. This camera is
designed for use in tough environmental conditions encountered in law enforcement, corrections, military, and
security activities. The AXON body camera is designed to record events in real time for secure storage, retrieval,
and analysis via the EVIDENCE.com services or in an offline configuration to your local computer. The recorded
events are transferred to your storage solution via the evidence transfer manager (ETM), the EVIDENCE.com
Dock, or by using EVIDENCE Sync software installed on a Windows computer.
The AXON body camera has two operating modes designed to accommodate the needs of law enforcement,
corrections, security, and the military. The default mode, or BUFFERING mode, provides pre-event buffering to
capture activities that occur prior to the user activating the EVENT mode. In addition, the AXON Mobile application
enables playback of footage on a smart phone for review prior to storing the data.
Instructional videos for using AXON systems are available at www.TASER.com under Training Videos.
Additional Reading
This manual explains how to operate the AXON body camera hardware. Other manuals cover additional aspects
of the AXON body system. These documents are available at www.TASER.com.
The TASER AXON System End-to-End Deployment Guide explains how to register for the EVIDENCE.com website,
configure settings, install EVIDENCE Sync software, assign personnel to cameras, recharge your controller, and
transfer video from an AXON device to a computer.
Detailed instructions for using AXON cameras and other TASER products with EVIDENCE Sync are available in
the EVIDENCE Sync User Manual.
For instructions on using your AXON camera with a smart device, see the AXON Mobile for Android Devices User
Manual or the AXON Mobile for IOS Devices User Manual, as appropriate.
If you have an EVIDENCE.com Dock, see the EVIDENCE.com Dock User Manual for how to transfer information
and recharge your controller.
Introduction
1