Taser Evidence-Sync - Manual (Page 65)

Page 65 of 86
8. Configure the device, as appropriate.
Whether you have an X2 (Figure 84), X26 (Figure 85), or X26P CEW (Figure 86), you
can update the Device Name and Assignee.
If your CEW is an X2, you have additional options:
• Determine whether an automatic shut-down performance power magazine (APPM)
will stop only trigger-initiated CEW discharges or both trigger and ARC switch
events. See the TASER X2 CEW User Manual for more information on APPM
functioning.
• Turn the LASER for 35-foot (10.7 m) Smart™ cartridges on or off.
If your administrator turns off the upload engineering logs option, TASER may not
be able to troubleshoot your CEW’s data remotely. It may be necessary to ship the
CEW to TASER for troubleshooting.
Figure 84 X2 Settings
CEW operating
options
APPM
configuration
Upload
engineering logs
to
EVIDENCE.com
LASER with 35′
cartridge loaded
Edit device
name
Edit
assignee