TFC Group EMD120 - Manual (Page 4)

4
Reset (first installation adjustment) Review/adjust
Menu
Set time: Day
Monday (1) blinking, using +/- to select, then OK
Set time: Minute
Minute blinking, using +/- to select, then OK
Set time: Hour
Hour blinking, using +/- to select, then OK
Set time: Format 24h or am/pm
24h blinking, using +/- to select, then OK
Set Program: P01 / P02 /
P03 or P--
Using +/- to select, then OK
to set ON/OFF times
or
press Menu to terminate
programming
OK Menu
P01-03, P--
Setting switching times:
First free memory location
blinks.
Press “-“ to go back one
memory location.
Press OK for setting the
switching times.
Prog01
Setting switching times:
First free memory location
blinks.
Press OK for setting the
switching times.
Set switching ON time: Hour
Hour blinking, using +/- to select, then OK
Set switching ON time: Minute
Minutes blinking, using +/- to select, then OK
Set switching ON time: Days
Mo-Su (1-7) blinking, using +/- to select, then OK
Set switching OFF time: Hour
Hour blinking, using +/- to select, then OK
Set switching OFF time: Minute
Minutes blinking, using +/- to select, then OK/Menu
Set display: channel 1 or 2
Ch1 blinking, using +/- to select, then OK
Menu
RUN
A maximum of 20 memory locations
can be occupied:
10 switching ON times
10 switching OFF times
Note:
P01-03
are pre-set
P01 is pre-set