TFC Group Talento 472 Plus - Manual

20
Safety precautions
· The connection and installation of electrical devices may only be carried out by a qualified
electrician.
· Interventions in and changes to the device result in the voiding of the warranty claim.
· Observe your national regulations and the respective safety provisions.
· Fixed and flexible conductors of up to 10 mm
2 may be attached to the external terminal clips.
· Flexible cables with a cross-section ≤ 1 mm 2 should not be attached.
General information
· Deactivation commands take priority over activation commands.
· If the power supply is correct, the dots shown between the hours and minutes (
HH : MM ) are
displayed permanently. The dots flash if the power supply is interrupted.
· If there is no power supply, the position indicator display goes out after 2 minutes.
· The whole display flashes if the battery needs to be changed within the next 2 weeks.
Installation on DIN rail Terminal diagram
5 6 7
L
1 2 3
N
5 6
L
1 2 3
N
S
C1
C2
C1