Setting time of day, Setting on/off times, Slide switches (under drop down cover) – TFC Group Towerchron QM1 User Manual
Page 14: Programming your “towerchron qm2
14
Setting time of day
Rotate the minute hand of the clock until the arrowhead in clock
face aligns with the correct time on the outer dial, i�e� 8 = 8�00 a�m�,
14 = 2�00 p�m�
Setting ON/OFF times
Move all tappets between ON and OFF times required to outer
position� The minimum switching time is 15 minutes�
Set any other ON/OFF periods in a similar manner
Slide switches (under drop down cover)
Pull top edge of drop down cover to gain access to slide switches�
Two switches are provided, one for heating, the other for hot water�
Depending on system installed, each switch provides following
functions:
– OFF
service off completely
– TIMED
service comes on between ON and OFF periods as set
on tappets on clock face
– CONST� service is on continuously
Programming your “TOWERCHRON QM2”
ON
OFF
OFF
CH
CH
HW
HW
TIMED
CONST.
OFF
TIMED
CONST.
ON
OFF
OFF
CH
CH
HW
HW
TIMED
CONST.
OFF
TIMED
CONST.
OFF
ON
ON
OFF