TFC Group Towerchron QE2 - Manual (Page 10)

2
PROGRAMMING YOUR “TOWERCHRON QE1”
SETTING CURRENT TIME AND DAY
Open the keypad cover
Make sure that the slide switch is on position “SET TIME AND DAY” to left.
If the battery is in a fully discharged condition at the moment of installation
then the screen will be blank. The screen will start to display approximately
2 minutes after plugging into mains supply. Now operate the “RESET” button.
Press the “RESET” button with a dull pointed instrument once
Press the “DAY” button until the actual day is marked
Repeatedly press “HOUR +/-”, then “MINUTES +/-” buttons until
current time is displayed.
NB • If you are setting the clock in wintertime (GMT): The clock is now
correctly set.
If you are setting the clock in summertime (BST): Press
the “SUMMER/WINTER” button once. The arrowhead at the bottom
of the display moves to indicate Summertime, and the clock is
correctly set.