Thermionic Culture THE SOLO VULTURE High Gain Distortion Unit - Manual (Page 7)

© Thermionic Culture Ltd, May 2012 6
15kHz
subtly takes off a little HF “tizz”
9 kHz
for unwanted “hard” distortion effects
4 kHz
is a pretty drastic setting. Can give a warm “valvy”
sound.
2.8 Dirty
and Clean output level controls
These 2 controls set the sound level sent to the output
valve. The channels can be selected by the toggle switch
to the right or a foot pedal. Switching is totally silent.
When using the Solo Vulture, set the 2 controls to get a
comparison between Clean and Dirty, also an adequate
output level. The headroom of this unit is higher than that
of the standard Culture Vulture.
For T & P distortion settings, the Dirty will be set much
lower than Clean but in the SQ settings it will be (possibly)
higher.