Thermionic Culture THE CULTURE VULTURE Mastering Plus - Manual (Page 8)

©Thermionic Culture Ltd, 2010-2014 7
4 Inputs & Outputs
All inputs and outputs are TRS ('stereo') jacks.
The DI inputs on the front are connected unbalanced with ring
shorted to sleeve (ground).
All line inputs and outputs, at the rear, are connected with the
signal connected to tip and ring and sleeve grounded.
The user has the option of taking the output direct from the
output valve by using the unbalanced outputs or via a
balancing transformer using the balanced outputs.
The unbalanced output gives a more 'open' sound, whereas
the balanced output will be a little more 'rounded' with some
bass distortion probable at high levels. Using the balanced
output will also help to avoid any hum loops so may be
quieter.
Both types of output cannot be used at the same time. Use of
unbalanced disconnects balanced.
Always use twin screened 'balanced' cable when connecting
line inputs and outputs. There should be no problem
whatsoever when connecting line inputs and outputs into
balanced or unbalanced systems.