Tiptop Z8000 Matrix Sequencer - Manual (Page 5)

LEDs.
The Z8000 uses multicolored LEDs to help with visual
feedback. The red lights are assigned to the eight 4
steps, the green lights are assigned to the two 16
steps & lastly the yellow lights engage when a 4 step
red light & 16 step green light intersect that specific
LED. In addtion to that, when two 4 step sequencer
red lights engage the light intensity of that led
increases by about 35%.
Whether the sequencer is clocked or not, its knobs
and lights are still on and functioning. (ex: the red led
of step A of sequencer 1 is on, plug the CV1 out and
turn that knob, you will hear that the step is “alive”.
+
+
+
+
Tipt p
A u d i o
Z8000 Matrix Sequencer/Programmer
A
1
2
3
B C D
CV4
CV3
CV2
CV1
RESET DIRECTION CLOCK
RESET DIRECTION CLOCK
RT CK
DIR
RT CK
DIR
1
D
C
B
A
4
3
2
4
CVA CVB CVC CVD