Tiptop Access - Manual (Page 2)

The Zeus Access provides an easy way of linking an external power supply to
the Zeus Power System using just 2HP of space. Together with the Zeus Studio
Bus board and a few simple steps, you can now power up a modular system with
ease!
Residing on the left-most side of your case, the Zeus Access supplies a convienent
interface to easily power the Zeus Powered Bus Board system from the external
Cincon-TTA laptop-style universal power supply. The Zeus Access can be installed
in a Eurorack case with a maximum depth of 5.5 inches as the connecting leads
are 7.5 inches long. This balances usability while maintaining the audio-grade
power of the Zeus Power System.
The Zeus Access contains an On-Off toggle switch and 2.5mm DC Barrel Jack
(Center Pin +,) from which two terminal-fitted leads can connect to the +15V and
GND connections of the Zeus Studio Bus board. Both the switch and barrel jack
are rated for a maximum load of 5 Amps, perfect for powering up to 3 Studio Bus
Boards.
ZEUS Access
+
-
(Continued)