Crossbar assembly – TracRac IM CabRac User Manual
Page 4
Advertising
4 CabRac
INSTRUCTION MANUAL
TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4839 * 800-501-1587
CROSSBAR ASSEMBLY
1. Slide four square nuts (item 5) into the bottom T-Slot on the crossbar. Reference Figure 4.
2. Insert a crossbar end cap (item 2) into each end so that the flat edges of the end caps line up with the edge of
the crossbar. Reference Figure 4.
3. Secure end caps with M6 x 1 (item 9) socket head cap screw using the 5mm Allen Wrench through the
bottom of the crossbar. Reference Figure 4.
Figure 4.
Advertising