Presenterware for turningpoint anywhere, Connecting the presenterware device – Turning Technologies PresenterWare User Manual
Page 10
PresenterWare
10
PRESENTERWARE FOR TURNINGPOINT
ANYWHERE
Configuring PresenterWare for TurningPoint AnyWhere
The following settings must be configured in order for PresenterWare to connect to a TurningPoint AnyWhere session.
1
Open TurningPoint AnyWhere.
2
Click Settings/Preferences from the launchpad.
3
Select Response Devices from the left panel.
4
Scroll to the PresenterWare section in the right panel.
5
Change the Enable PresenterWare Support drop-down menu to True.
6
Enter the network port number in the PresenterWare Port field. The default port is 6090.
7
Optionally, enter the presenting computer’s Bonjour Name.
TIP
To learn more about Bonjour zero-configuration, visit
.
Connecting the PresenterWare Device
PresenterWare is able to connect to the session once the configuration in TurningPoint AnyWhere is complete. The steps
below will establish a connection between PresenterWare and TurningPoint AnyWhere.
1
Open the PresenterWare application.
2
Enter the presenting computer’s Host (IP address) by expanding the + icon
in the upper right corner of the application.
l
Manually entered Hosts are displayed under Manual Hosts. To enter
a Manual Host, select the + icon and enter the presenting computer’s
Host. The presenting computer’s Host (IP address) can be found in
Settings under PresenterWare.
l
Hosts running Bonjour are displayed under Discovered Hosts.
3
Tap the Host or Bonjour Name associated with the presenting computer.
l
A challenge code is displayed on the device when connecting to a
Host for the first time.
4
On the PC launchpad, click Poll. On the Mac menu bar, click Window.
turningtechnologies.com/user-guides