Chapter 1: overview, Introduction, Supported products – Ubiquiti Networks PowerBridgM User Manual

Page 4: Airos v5.5.4 network modes, Chapter 1, Overview

Advertising
background image

1

Chapter 1: Overview

airOS

v5.5.4 User Guide

Ubiquiti Networks, Inc.

Supported Products

airOS v5.5.4 supports the M Series product versions,
including the following:
• Rocket

M

• Rocket

M GPS

• Rocket

M Titanium

• NanoBridge

M

• NanoStation

M/NanoStation loco™M

• Bullet

M

• Bullet

M Titanium

• PicoStation

M

• PowerBridge

M

• airGrid

M

• WispStation

M

For more information, visit

www.ubnt.com

.

airOS v5.5.4 Network Modes

airOS supports the following network modes:
• Transparent Layer 2 Bridge
• Router
• SOHO Router

Chapter 1: Overview

Introduction

Welcome to airOS

v5.5.4 – the latest evolution of the

airOS Configuration Interface by Ubiquiti Networks

.

airOS v5.5.4 provides new features, including:
• Maps commonly used VoIP TOS values (0x68, 0xb8) to

Voice queue

• Alternative data rate algorithm option
• Audio option for Antenna Alignment tool
• Signal strength from remote radio shown in Station

information window (airMAX

mode only)

• TX/RX bit rate statistics shown in AP or Station

information

• Feed only option for antenna type (airGrid

and

NanoBridge

models only)

airOS is an advanced operating system capable of
powerful wireless and routing features, built upon a
simple and intuitive user interface foundation.
This User Guide describes the airOS operating system
version 5.5.4, which is integrated into all M Series products
provided by Ubiquiti Networks.

Note:

For compatibility, legacy or 802.11 a/b/g

devices should use legacy firmware with airMAX
support (such as airOS firmware v4.0). Legacy
clients can only work as airMAX clients with the M
Series device acting as an airMAX AP.

Advertising
This manual is related to the following products: