Ubiquiti Networks PowerBridgM - Manual (Page 18)

15
Chapter 3: Main Tab airOS ™ v5.5.4 User Guide
Ubiquiti Networks, Inc.
RX Bytes Displays the total amount of data (in bytes)
received by the interface.
RX Errors Displays the number of receive errors.
TX Bytes Displays the total amount of data (in bytes)
transmitted by the interface.
TX Errors Displays the number of transmit errors.
Refresh To update the information, click Refresh.
DHCP Client
(Available in Router or SOHO Router mode only.) Displays
the device’s WAN IP address, netmask, DNS servers, and
gateway while the device is operating as a DHCP client of
an external DHCP server.
Interface Displays the interface that connects to the
WAN.
IP Address Displays the IP address assigned by an
external DHCP server connected to the WAN interface.
If an external DHCP server is not found, the IP address
will use the DHCP Fallback IP defined in the WAN Network
Settings. See “WAN Network Settings” on page 32 for
additional details.
Netmask Displays the Netmask assigned by an external
DHCP server connected to the WAN interface. If an
external DHCP server is not found, the IP address will use
the DHCP Fallback Netmask defined in the WAN Network
Settings. See “WAN Network Settings” on page 32 for
additional details.
Gateway Displays the gateway address assigned by an
external DHCP server connected to the WAN interface.
Primary/Secondary DNS IP The Domain Name System
(DNS) is an Internet “phone book” that translates domain
names to IP addresses. These fields identify the server IP
addresses that the device uses for translation.
DHCP Server Displays the IP address of the external
DHCP server that assigns the WAN IP address to the
device.
Domain Displays the domain name.
Total Lease Time Shows the total time (validity) of the
leased IP address assigned by the external DHCP server.
Remaining Lease Time Displays the remaining time
of the leased IP address assigned by the external DHCP
server.
Renew To request new IP settings from the external
DHCP server, click Renew.
Release To release the current IP settings, click Release.
Refresh To update the information, click Refresh.
ARP Table
Lists all the entries of the Address Resolution Protocol
(ARP) table currently recorded on the device.
ARP is used to associate each IP address to the unique
hardware MAC address of each device on the network. It
is important to have unique IP addresses for each MAC
address or else there will be ambiguous routes on the
network.
IP Address Displays the IP address assigned to a network
device.
MAC Address Displays the MAC address of the device.
Interface Displays the interface that connects to the
device.
Refresh To update the information, click Refresh.
Bridge Table
(Available in Bridge mode only.) The table displays the
entries in the system Bridge Table.
Bridge The name of the bridge.
MAC Address The network device identified by its MAC
address.
Interface The Bridge Table shows which bridge port
or interface, LAN (Ethernet) or WLAN (Wireless), the
specific network device is associated with. airOS can
forward packets only to the specified port of the device,
eliminating redundant copies and transmits.
Aging Timer Displays aging time for each address entry
(in seconds). After a specific timeout, if the device has not
seen a packet coming from a listed address, it will delete
that address from the Bridge Table.
Refresh To update the information, click Refresh.