Ubiquiti Networks PowerBridgM - Manual (Page 63)

60
Chapter 9: Tools airOS ™ v5.5.4 User Guide
Ubiquiti Networks, Inc.
Site Survey
The Site Survey tool searches for wireless networks in
range on all supported channels. In Station mode, you
can change the frequency list; for details, see “Frequency
Scan List, MHz” on page 21.
The Site Survey tool reports the MAC Address, SSID, Device
Name, Encryption type (if any), Signal/Noise in dBm,
Frequency in GHz, and the wireless Channel of each AP in
the surrounding environment.
To refresh the window, click Scan.
Discovery
The Device Discovery tool searches for all Ubiquiti devices
on your network. The Search field automatically filters
devices containing specified names or numbers as you
enter them.
It reports the MAC Address, Device Name, Mode, SSID,
Product type, Firmware version, and IP Address for each
Ubiquiti device. To access a device configuration through
its web management interface, click the device’s IP
address.
To refresh the window, click Scan.
Ping
You can ping other devices on the network directly from
the device. The Ping tool uses ICMP packets to check the
preliminary link quality and packet latency estimation
between two network devices.
Network Ping
Select Destination IP You have two options:
• Select a remote system IP from the drop‑down list,
which is generated automatically.
• Select specify manually and enter the IP address in the
field displayed below.
Packet Count Enter the number of packets to send for
the ping test.
Packet Size Specify the size of the packet.
Start Click this button to start the test.
Packet loss statistics and latency time evaluation are
displayed after the test is completed.
Traceroute
The Traceroute tool traces the hops from the device to a
specified outgoing IP address. Use this tool to find the
route taken by ICMP packets across the network to the
destination host.
Destination Host Enter the IP address of the destination
host.
Resolve IP Addresses Select this option to resolve the IP
addresses symbolically rather than numerically.
Start Click this button to start the test.
Responses are displayed after the test is completed.