Aiming – Ubiquiti Networks NanoBea ac User Manual
Page 9
Advertising
5. Attach the NanoBeam to the Ball Joint Mount and turn the
Lock Ring to secure it. Keep the Lock Ring loose enough to
allow the NanoBeam to pivot for aiming.
Aiming
1. Ensure the opening of the Ethernet cable is pointed
towards the ground.
2. Aim the front of the NanoBeam towards the other end of
the wireless link.
3. Hand-tighten the Lock Ring to lock the aim.
Note:
Do not use a tool to tighten the Lock Ring.
Tighten the Lock Ring by hand only.
Advertising