Ubiquiti Networks NanoBeaM - Manual (Page 7)

Wall-Mount
The NanoBeam must be mounted directly to a wood stud
or other structurally stable surface to avoid damage to the
mounting hole when you adjust the aim.
1. Mark the desired location of the mounting point.
2. If needed, drill a pilot hole for the fastener.
3. Insert the Ball Joint Mount into the Lock Ring with the
threads of the Lock Ring facing the ball joint.
4. Attach the Ball Joint Mount to the wall by inserting a
fastener through the center of the ball joint, and into the
hole in the wall. Securely tighten the fastener.