Ubiquiti Networks NanoBridgM - Manual (Page 4)

2
NanoBridge ™ M5 Quick Start Guide
Application Examples
The NanoBridge mounted outdoors without the Dish Reflector
installed provides outdoor to indoor coverage using the 3 dBi feed
antenna only.
The NanoBridge mounted outdoors with the Dish Reflector
installed provides directional outdoor coverage (gain reflector
dependent).
Installation Requirements
• 10 mm wrench
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial‑grade shielded Ethernet cable from Ubiquiti
Networks
™ . For more details, visit www.ubnt.com/toughcable