Ubiquiti Networks UniF AP AC Outdoor - Manual (Page 6)

3
Chapter 1: System Setup UniFi ® Controller User Guide
Ubiquiti Networks, Inc.
For most versions of Windows, the UniFi Controller
software can also be launched from Start > All Programs.
For Windows 8, the UniFi Controller software can also be
launched from the Start menu.
Configuring the UniFi Controller Software
1. The UniFi Controller software startup will begin. Click
Launch a Browser to Manage Wireless Network.
2. Select your language and country. Alternatively, you
can click restore from a previous backup to use a file that
contains your backup settings. Click Next.
Note: U.S. product versions are locked to the U.S.
Country Code to ensure compliance with FCC
regulations.
3. Select the devices that you want to configure and
click Next.
4. The UniFi Installation Wizard will create a secure
primary wireless network for your devices. Perform the
following steps:
a. Enter the wireless network name or SSID in the Secure
SSID field.
b. Enter a passphrase to be used for your primary network
in the Security Key field.
c. To enable guest access, select Enable Guest Access,
and enter a guest network name in the Guest SSID field.
d. Click Next.
5. Enter an admin name in the Admin Name field and
password in the Password field to use when accessing
the management interface. Confirm your password in
the Confirm field. Click Next.
6. Review your settings. Click Finish to save your settings
or click Back to make changes. Once the wizard
is finished, the browser will be redirected to the
management interface.
Congratulations, your wireless network is now configured.