Ubiquiti Networks UniF AP AC Outdoor - Manual (Page 8)

3. Uniformly hand-tighten each Flange Nut. Ensure the Pole
Clamp is evenly clamped around the pole and tighten each
Flange Nut to approximately 25 N-m (18 lb-ft).
4. Attach the other Pole Clamp to the pole by sliding the
Carriage Bolts around the pole and into the bottom two
slots of the Mounting Bracket.
5. Uniformly hand-tighten each Flange Nut. Ensure the Pole
Clamp is evenly clamped around the pole and tighten each
Flange Nut to approximately 25 N-m (18 lb-ft).