VAC Avatar Super - Manual (Page 7)

Page 7
This knob is spring loaded; moving the control clockwise will toggle Avatar Super between
the “Mute” and “Operate” condition. When Avatar Super is muted, a red glow will be
observed in the bias meter. On occasion Avatar Super may seem not to have responded to
a turn of the “Mute” knob; this is due to “contact bounce” in the switch. Simply turn the
knob again until the desired condition is attained.
REMOTE CONTROL
The remote control allows for wireless adjustment of “Mute” and “Volume”.
The remote wand is powered by two “AAA” batteries. These should be of the alkaline type.
You will need to install them in the wand before using the remote. Since batteries can leak,
they should be removed from the wand if it is not going to be used for an extended period
of time.
Volume Up/Down: These buttons cause a motor to turn Avatar Super’s volume control.
Motorized controls offer superior sound, as well as direct visual indication of volume
setting. The front panel control may also be used directly in the conventional way.
Mute: Pressing either side of the “Mute” button will toggle Avatar Super between the
“Mute” and “Operate” condition. When muted, a red glow will be observed in the bias
meter. Mute is automatically engaged when switching on Avatar Supers equipped with the
remote control option.