VAC Phi 200 User Manual
Page 11
10
REPLACEMENT OF LOW LEVEL TUBES
All power must be switched off. Allow tubes to cool down. Remove and replace with new tubes
of the appropriate types. Note that these tubes have a central platic shaft with a locator ridge on
one side; this ridge must be aligned with the slot in the socket.
Replacement tubes are available from VAC and other sources.
For further information, refer to Tips & Advice: A Word About Tubes in General and Tips & Advice:
A Word About Low Level Tubes.
CARE OF CHASSIS
VAC chassis are machined aluminum for superior electromagnetic performance. The main chassis is
finished in a durable matte powdercoat paint. Cleaning the unit with a damp cloth WHILE THE AMP
IS SWITCHED OFF AND UNPLUGGED should suffice. Do not get cleaning solutions onto or into the
tube sockets or jacks.