VAC Signature Preamplifier Mk II User Manual
Page 9
REMOTE CONTROL
The remote control allows for wireless adjustment of MUTE and VOLUME.
The remote wand is powered by two “AAA” batteries. These should be of the alkaline
type. You will need to install them in the wand before using the remote. Since batteries can
leak, they should be removed from the wand if it is not going to be used for an extended
period of time.
Mute: Pressing either side of the “Mute” button will toggle between the “Mute” and
“Operate” condition. When muted, a red glow will be observed in the LED indicator. Mute
is automatically engaged when the preamplifier is first switched on.
Volume Up/Down: These buttons cause a motor to turn the volume control; the more
briefly you press the control, the smaller the motion of the volume control. Motorized
controls offer superior sound, as well as direct visual indication of volume setting. The front
panel control may also be used directly in the conventional way.
Note: Your remote control wand may contain buttons for additional functions, but these
are not active with the Signature Mk II Preamplifier.