Denon AVR-3802 - Manual (Page 21)

21
ENGLISH
4 Use the D and H cursor buttons to display
“RESET PRE” on the remote control unit, then
press the ENTER button.
• After “SEL PRE” is displayed on the remote
control unit’s display, the registered preset
memory is displayed on the remote control
unit’s display.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5 Use the D and H cursor buttons
to select the code to be reset.
When the mode you want to reset is shown on
the remote control unit’s display, press the
ENTER button to reset the preset memory.
7 “CONFIRM” is displayed. To reset the preset
memory, press the ENTER button while
“CONFIRM” is displayed.
• “COMPLETE” appears on the remote control
unit’s display.
ENTER
SHIFT
BAND MODE
TUNING
TUNING
ENTER
SHIFT
6
1 Press the power ON/SOURCE button and the
OFF button at the same time.
• “SET UP” appears on the remote control
unit’s display.
OFF ON / SOURCE
2 Press the ENTER button. ENTER
SHIFT
3 Use the D and H cursor buttons to display
“RESET” on the remote control unit’s display,
then press the ENTER button.
• “RESET PRE” is displayed.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(3) Resetting “learned” buttons
1 2 3
4 5 6
7 8 9
+10 0 TV/ VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT RC-884
ON / SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
SURROUND
INPUT
OUTPUT TEST TONE SPEAKER
6.1 / 7.1 SURROUND
5CH / 7CH
ANALOG EXT.IN MODE
CALL 2 BACKLIGHT CALL 1
STEREO
STEREO DOLBY/DTS
SURROUND DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN SETUP
MENU
SHIFT
SURR. PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 5, 6
4 Use the D and H cursor buttons to display
“RESET LRN” on the remote control unit’s
display, then press the ENTER button.
• “SEL MODE” is displayed, then “TV”
appears.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5 Use the D and H cursor buttons to select the
mode of the button to be reset, then press the
ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
“CONFIRM” is displayed. To reset
the “learned” button for the
selected mode, press the ENTER
button while “CONFIRM” is
displayed.
ENTER
SHIFT
6
1 Press the power ON/SOURCE button and the
OFF button at the same time. “SET UP”
appears on the remote control unit’s display.
OFF ON / SOURCE
2 Press the ENTER button.
ENTER
SHIFT
3 Use the D and H cursor buttons to display
“RESET” on the remote control unit, then press
the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(4) All reset function
1 2 3
4 5 6
7 8 9
+10 0 TV/ VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT RC-884
ON / SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
SURROUND
INPUT
OUTPUT TEST TONE SPEAKER
6.1 / 7.1 SURROUND
5CH / 7CH
ANALOG EXT.IN MODE
CALL 2 BACKLIGHT CALL 1
STEREO
STEREO DOLBY/DTS
SURROUND DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN SETUP
MENU
SHIFT
SURR. PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4
2, 3, 4, 5
4 Use the D and H cursor buttons to display
“RESET ALL” on the remote control unit, then
press the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
“CONFIRM” is displayed. To reset, press the
ENTER button while “CONFIRM” is displayed.
• “BUSY” is displayed during the resetting
operation, and “COMPLETE” is displayed
once resetting is completed.
ENTER
SHIFT
5
• This function is for resetting all the settings to the
factory defaults.