VDO M3WL - Manual (Page 28)

28
M3 WL
Settings – total values – total distance
The left digit flashes.
Press the
BIKE button to change the digit.
Once this digit has been set, confirm the setting by pressing
the
SET button.
The next digit starts to flash and is ready to be set.
Press the
BIKE button to change this digit. Once this digit
has also been set, confirm the setting by pressing the
SET button.
The next digit flashes.
Once all digits have been set, confirm the setting again
by pressing the
SET button.
The response “Set OK” appears on the display.
The set value is stored.
If you want to configure further settings,
press the
BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M3 WL returns to function mode.