32 m4 wr settings – total values – total ride time – VDO M4WR User Manual
Page 32
32
M4 WR
Settings – total values – total ride time
You can set the total ride time on the VDO M4. E.g. you can
set your total ride time (total ride time for all trips) at the start
of the new cycling season).
You can set the values separately for bike 1 and bike 2.
ATTENTION:
the M4 has a data memory.
No data is lost when the battery is replaced.
How to set the total ride time:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to switch from Totals to Settings.
Press the
SET button to open the settings.
“Language” appears on the display.
Press the
BIKE or ALTI button to scroll to the setting for
the
Total Time.
Press the
SET button to open the setting for the Total Time
(total ride time).
Press the
BIKE to select whether you want to set the
total time
for
bike 1 or bike 2.
Press the
SET button to confirm the selection.
The
left digit
of the
hours setting flashes
and is
ready to be set.
Press the
BIKE or ALTI button to set the value of this digit.
Press the
SET button to confirm your setting.