Velodyne Digital Drive 1812 Signature Edition - Manual (Page 53)

Appendix C: What’s New in release 2.0
47
.
w w w . v e l o d y n e . c o m
Digital Drive User’s Manual
Your Digital Drive subwoofer has version 2.0 of the digital drive room management software
installed. Following is a description of the new features for version 2.0.
Feature Description
Auto-EQ New option on graph screen. When set to AUTO,
this option resets the EQs to default third-octave
frequencies (20, 25, 32, 40, 50, 63, 80, 100 Hz),
and adjusts +/- 1 dB max each sweep. Can be
done on SETUP (affects all presets) or for
an individual preset.
Self-EQ Allows EQing without video or EQ out hookup. On
the main screen, when 3-2-1 is pressed on the
remote, the DD automatically emits 25 sweep
tones. If the microphone is connected, the unit self-
EQs. Note that this only affects the low frequency
EQ – it does not affect phase, crossovers, or
other settings.
Individual EQs per preset Each preset can have its own independent EQ
setup, or all can be affected through the SETUP
selection. Also, EQ curves reflect the effect of ALL
settings for each preset, e.g. crossovers, phase,
etc. Previously, these settings only reflected the
SETUP values.
Defeatable Low-Pass Crossover The low-pass crossover can be completely shut off
by pressing the reset button when the cursor is on
the low-pass crossover in the settings screen.
Selectable default preset New field on settings page – whatever preset is
selected will be invoked at startup
Navigation using up, down, left, For people that didn’t like the left-right only
right arrows and select. navigation. Now users can use all four directional
arrows to position the cursor, then press SELECT to
activate the field for alteration. For users who liked
the old navigation, simply press select and then use
the left, right, up, and down buttons as before.