Voodoo Lab Commander - Manual (Page 7)

FAQ
Can I use a third-party MIDI footcontroller with Pedal Switcher?
Not really. You can call up the Pedal Switcher’s presets with MIDI program change commands,
but there is no way to save or modify presets without Commander.
Can I change the MIDI channel the Commander sends program changes on?
No. Commander only sends program changes on MIDI channel 1. If you need to do more intricate
MIDI mapping and program changes, the Ground Control Pro is better suited for those applications.
Can I use a Commander to control the rackmount GCX Audio Switcher?
No. Commander was specifically designed to work with Pedal Switcher only. Since the GCX has
no instant access switches, you wouldn’t be able to select your loops or save them.
Can I use more than one Commander at the same time?
Yes. Multiple Commanders can be used for changing presets from an alternate stage position.
However, you will need a cable adapter to provide phantom power to the 2nd Commander.
Can I control the Commander remotely with any MIDI controller?
Yes. You can call up Commander’s presets remotely with another controller or sequencer using
MIDI patch changes.
5