Voodoo Lab Pedal Power Digital - Manual (Page 8)

- 6 -
using both 9V and 12V jacks of the pair. This WILL exceed the 400mA current
rating.
Additional Cables
The DC power cables supplied with your Pedal Power Digital are suitable for
most common pedal effects. If you need additional cables, different lengths,
reversed polarity, or a special connector, these are available from Voodoo Lab at
our online store.
Also available are adapter cables:
Split Output Adapter: Provides two output jacks from a single Pedal Power Digital
output. One side is ground lifted to minimize the possibility of ground loops and
added noise.
Voltage Doubler Adapter: Combines two Pedal Power Digital outputs to make
18V or 24V at up to 400mA. Ideal for MXR Flanger and various Fulltone and
Keeley products.
See the entire selection and purchase cables online at:
www.voodoolab.com/cables.htm