Voodoo Lab Superfuzz User Manual

Superfuzz, User’s manaual

Advertising
background image

SUPERFUZZ

User’s Manaual

Voodoo Lab Guitar Effect Pedals are handcrafted from the finest modern and vintage components. They

are housed in rugged aluminum cases with heavy duty metal switches. True bypass switching is used for

absolutely no loss of tone when the pedal is bypassed. These are the finest effect pedals a musician can buy.

All Voodoo Lab products are manufactured in the U.S.A. by Digital Music Corporation. For more infor-

mation about Digital Music and Voodoo Lab products, please visit our web site at www.voodoolab.com.

Description

The problem with most fuzz pedals is that you just get one sound, like it or not. And at less than “Plexi

on 10” volumes they tend to sound thin. The Voodoo Lab Superfuzz is designed to provide a wide variety

of vintage and modern tones that are usable over a range of volume levels. This is accomplished by taking

a classic ‘60s fuzz design and adding unique resonance and tone circuits.

Operation

1. Attack: This is the gain. Turning it up will provide additional sustain and buzz. You can also back down

the volume control on your guitar for cleaner tone.

2. Tone: This control affects mostly the midrange frequencies. Set it straight up at 12:00 to get a classic

fuzz sound. Turn it down (counter-clockwise) for a modern “scooped” tone. Turning it up provides a

prominent midrange, bluesy voicing.

3. Resonance: This is essentially a sub-harmonic boost. It allows you to bring up the bottom end without

losing bass crispness or causing excessive speaker distortion. Turn it all the way down for traditional

fuzz. Turn it up for girth and fatness, or when playing at low volume.

4. Volume: This sets the output level. Set as desired! Plenty of juice is available to overdrive your tube amp.

Plugging into the input jack turns on the power to your Superfuzz.

To preserve battery life, always disconnect the input cable when not in use.

Battery

The Voodoo Lab Superfuzz is powered by a single 9V battery. To replace the battery, remove the four

screws which secure the bottom cover.

External Power

The Voodoo Lab Superfuzz can be powered externally with a regulated 9VDC power supply eliminating

the need for the internal battery. The external power supply connector is a 5.5x2.1mm barrel with center

negative. The Voodoo Lab Pedal Power will power up to eight pedals without any added hum or noise.

Advertising