Waldorf Zarenbourg - Manual (Page 13)

13
Effects
The Effects
Here you can select and adjust the in-
dividual effects. You can also enable
any combination of effects. The effects
are selected using the Effect Selector
[13], and the active effects are noted
by the Effects Indicators [14].
You can enable an effect simply by
using the Effect Selector [13]. Then if
you want to add more effects, press
the Effect Hold button [15] to keep
the current effect active when another
effect is selected. This way you can
combine any or all of the available
effects. The Effect Hold button [15]
will light when the effect is selected to
indicate that Effect Hold is active for
the current effect. When the effect is
not selected but still in its hold state,
its effect indicator LED is lit. You can
deactivate Effect Hold for each indivi-
dual effect by pressing the Effect Hold
button [15] again when each effect is
selected. To deactivate Effect Hold for
ALL effects, turn the knob to the “Off”
position, and press the Effect Hold
button [15].
1
The Effect Hold button [15] has ano-
ther useful function: If you keep it held
when you select a new sound, the cur-
rent active effects and their settings
are maintained for the new sound. This
way you can conveniently preserve
your carefully created effect settings
while switching between different
sounds.
1 (Note: After selecting a sound, the Effect Selector [13]
may point to an inactive effect.)