Registration and configuration – WatchGuard QMS User Manual
Page 2
Registration and Configuration
1
2
Register with LiveSecurity® Service
• Find the serial number on your device and record it.
• Go to http://www.watchguard.com/activate
• Log in.
NOTE: If you are new to WatchGuard®, follow the instructions provided at the URL above to create a profile.
• Follow the instructions on the screen to enter your serial number and receive a
feature key.
NOTE: If you will not have an Internet connection during the setup procedure, it is highly recommended to
copy your feature key to a text file during the activation process.
Configuration Checklist
• To configure your WatchGuard device, you must collect the following information
about your network:
Network Information Example Settings
Your Settings
Hostname
hostname
Domain Name
example.com
IP Address
10.0.1.10
Subnet Mask
255.255.0.0
Gateway Address
10.0.1.1
Name Server Address
10.0.2.53
Default User ID
admin
Default Password
admin
Organization Name
example.com
Server Admin Email
Serial Number
B0E112345-1234