Wharfedale Pro Versadrive SC-26 - Manual (Page 6)

5
The output gain can be adjusted 2 dB [+/-] in 0.dB increments, you can send one or both inputs to each output
channel.
• To edit, hold in the MUTE/EDIT button for 3 seconds on the channel of your choice.
• Press GAIN and you will see a screen to edit which inputs are used on that output channel plus gain value in dB.
• Turn the encoder to toggle between gain value and input.
• Adjust the value using the rotary control similarly to the other settings.
The dynamic limiter works independently on each channel. Parameters which can be adjusted include threshold -20dB to
+20dB, Attack 0.3 to 00ms and Release 2/4/6/8/6/32x.
• To edit, hold in the MUTE/EDIT button for 3 seconds on the channel of your choice.
• Press LIMITER and you can edit your desired parameter.
• Use the rotary encoder to scroll between limiter parameters.
• Press the encoder to a parameter of your choice and rotate encoder accordingly.
Each channel works independently with a HPF and LPF on each channel. Frequency response is between 20Hz – 20kHz
with Linkwitz-Riley, Bessel and Butterworth algorithms with a slope of 2/8/24/48dB per octave. To edit, hold in the
MUTE/EDIT button for 3 seconds on the channel of your choice.
• Press X-OVER and you can edit your desired parameter.
• Use the rotary encoder to scroll between crossover parameters.
• Press the encoder to a parameter of your choice and rotate encoder accordingly.
Output Gain Settings
Output Limiter Settings
Crossover Settings
The system settings are edited in a similar way to the audio settings, by utilising the rotary control for scrolling through
different options. Press SYSTEM to access the system settings, scroll through and press on your selected setting. Rotate
the control to make changes and press once more to confirm your setting. The following system settings can be edited:
• Device ID: Up to 250 units can be used together. To keep organised you can edit the number / order of particular
Versadrive SC-26 units.
• Password: A 6 digit password can be set for safety at your venue and to lock the controls from unauthorised users.
• Backlight setting: Can be adjusted to stay on permanently or go off after 0s of editing.
• Current program: Displays the patch currently being used.
• System Information: Firmware version is displayed.
Editing System Settings