Wharfedale Pro Q-215 - Manual (Page 2)

OPERATING MANUAL AND USER GUIDE
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS carefully and become familiar with the features and functions of these
products before operating them.
2. RETAIN THESE INSTRUCTIONS for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system. With all system
components connected, turn on source equipment (mixers, signal processors, record and playback
units, etc.) BEFORE powering up amplifiers. Transient voltages from powering up source equipment
can damage speakers if amplifiers are already turned on. Make sure that amplifier volumes are
set to their minimum settings and power up any system amplifiers LAST. It is recommended that
all system components be allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all
amplifiers off first, before powering down any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers.
Use only approved speaker cables with proper connectors.
6. MAINS SUPPLY AND SAFETY – The main operating voltage of Wharfedale electronics is shown on the
rear panel of the device. If it does not match the voltage in your area, contact your dealer.
7. CAUTION – Professional sound reinforcement systems are capable of generating very high sound
pressure levels and use high voltage. Use care with placement and operation to avoid exposure to
excessive volume levels, water or moisture.
8. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service
this product. Warranty nullification could result if this is attempted.
1