Wharfedale Pro WPB-1 - Manual (Page 2)

INTRODUCTION
Thank you for purchasing the Wharfedale Pro WPB-1 Wall Mounting Bracket!
The WPB-1 is a heavy-duty wall mounting bracket system that will provide a secure
and versatile mounting option for a variety of Wharfedale Pro speaker models, with an
emphasis on the popular Titan™ Series of passive and active speakers.
The WPB-1 was designed with the angular versatility needed for proper speaker
placement in permanent speaker installations. All steel construction assures accurate
adjustments over time and extended reliabilty.
There are ten wall mounting points available on the wall plate. These mounting points
allow for a multitude of mounting options on various wall types. Be sure to use the
proper devices to secure the bracket and consider the wall material and the weight
of the speaker and the bracket when determining which method will provide the best
option for safety, strength and durability.
WARNING: RIGGING – SUSPENDING – MOUNTING
The rigging, suspension or mounting of any speaker system can expose members of
the public to serious health risks and even death. UNDER NO CIRCUMSTANCES
ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT SPEAKERS UNLESS YOU
ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL,
STATE AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS
MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT
KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR
ADVICE AND ASSISTANCE. For safety reasons, it is highly recommended that at
least two people work on any speaker mounting project when installing the WPB-1.
Wharfedale Pro assumes no liability for damages incurred due to use of improper or
inadequate mounting techniques or materials.