Wisdom Audio Sage Series P38 - Manual (Page 14)

14
mounted in the bezel and grille assembly at this time. They can
be mounted later, after all the paint is dry.
8. Using assistance to hold the speaker modules away from the wall,
connect both high and low pass speaker cables to the two con-
nectors at the end of the back box, paying attention to assign the
correct band-pass and polarity to their respective speaker connec-
tors.
9. Insert the speaker/back box assembly into the Uni-Grip frame and
attach using the supplied Allen head screws and 3/32” drill bit.
Do not over torque or strip these screws.