Wyred 4 Sound DAC-2 User Manual
Page 5
_____________________________________________________________________
WYRED 4 SOUND DAC-v6.1
4235 Traffic Way Software ver. 1.6n
Atascadero, CA 93422
PH: 805-466-9973
FAX: 805-462-8962
©2013 WYRED 4 SOUND LLC
All rights reserved.
Page 5 of 16
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
With a quick look at the setup options, you will quickly see how flexible the DAC-2 really is. Each type of
input can be configured to fixed or variable volume control, and you can also independently choose the level of
each. Min/Max volume levels are also adjustable for each input to offer optimal flexibility for those low or high
sensitivity systems. As you will find, other setup options include remote on/off, HT trigger in/remote trigger on,
HT display dim level, I
2
S justification select for the HDMI input, IIR Bandwidth, Roll-off slope (fast/slow), and a
default reset in case things get jumbled up.
To enter the Setup Menu, first turn the unit off from the power button on the front. Next push and hold
the (UP) and (DOWN) buttons at the same time and press the (POWER) button. Once the menu is activated,
you can use the up and down buttons to scroll through the different setup registers. Once the register is selected
that you wish to adjust, press the power button to select and enter that register. The menu will now be adjustable
(EDIT MODE) and you can use the up/down buttons again to edit the settings. Once the desired setting has
been selected and is displayed, press the power button again to save and return to the main menu. You can now
scroll through more settings and use the same method to make the changes needed. To exit and apply all
changes, press and hold the power button in any main menu register (NOT IN EDIT MODE). The unit will
then power down and will be ready for use.
The Menu Map is as follows:
• IIR Bandwidth (<50k / 50k / 60k / 70k)
• Roll-off slope (Fast / Slow)
• I
2
S justification (I
2
S / Left justified / Right justified)
• Remote control select / Trigger in use (On-Off / Off-Off / On-On / Off-On)
see “DC Trigger / HT Bypass” for more information
• HT Display Dim level (Off / Low / Medium / High)
• Coax Volume select (Variable / Fixed)
• Coax Minimum Volume level (0-70)
• Coax Maximum Volume level (0-70)
• Toslink Volume select (Variable / Fixed)
• Toslink Minimum Volume level (0-70)
•
Toslink Maximum Volume level (0-70)
• USB Volume select (Variable / Fixed)
• USB Minimum Volume level (0-70)
•
USB Maximum Volume level (0-70)
• AES/EBU Volume select (Variable / Fixed)