Wyred 4 Sound DAC-1 User Manual
Page 5
_____________________________________________________________________
WYRED 4 SOUND DAC-1 v5.1
4235 Traffic Way
Atascadero, CA 93422
PH: 805-466-9973
FAX: 805-462-8962
©2013 WYRED 4 SOUND
All rights reserved.
Page 5 of 14
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
With a quick look at the setup options, you will quickly see how flexible the DAC-1 really is. With each
input offering different output levels, you can choose the independent control of each source to best suit the
needs of your system. As you will find, other setup options include display dimming options, automatic input
scrolling, IIR Bandwidth, PCM Roll-off slope (fast/slow), and a default reset in case things get jumbled up.
To enter the Setup Menu, push and hold the (UP) and (DOWN) buttons while pressing the (POWER)
button when the unit is off. Once the menu is activated, you can use the up and down buttons to scroll through
the different setup registers. Once the register is selected that you wish to adjust, press the power button to select
and enter that register. The menu will now be adjustable (EDIT MODE) and you can use the up/down buttons
again to edit the settings. Once the desired setting has been selected and is displayed, press the power button
again to save and return to the main menu. You can now scroll through more settings and use the same method
to make the changes needed. To exit and apply all changes, press and hold the power button in any main menu
register (NOT IN EDIT MODE). The unit will then power down and will be ready for use.
The Menu Map is as follows: (default = bold)
• IIR Bandwidth (<50k / 50k / 60k / 70k)
• Roll-off slope (Fast / Slow)
• Display Dim level (Off / Low / Medium / High)
• Coax 1 Max level (-0-70 db)
• Coax 2 Max level (-0-70 db)
• Toslink 1 Max level (-0-70 db)
• Toslink 2 Max level (-0-70 db)
• USB Max level (-0-70 db)
• Automatic input scrolling (Off / Up / Down)
• Default Reset (On / Off)