Xblue Networks X-50 - Manual (Page 28)

Using your Telephone
28 XBLUE Networks
3
Placing a c
all
Placing a call
There are two types of calls, internal or Intercom and external or over the telephone line. In either case, you can
simply dial the desired telephone number and the X-50 will automatically route the call. If the dialed number is
part of the internal numbering plan such as an extension, which are numbered 101 through 125, at default, the
call will ring the appropriate extension. If the number is not within the numbering plan, the X-50 will
automatically connect to a telephone line or you can select a specific telephone line, and the call will be placed.
TABLE 3.2 Basic Operations
Operation Description
Place a Call
Dial the desired telephone number. The number will appear in the display
but not sent to the telephone line provider, allowing you to delete
(backsp) any incorrect numbers.
Wait 5 seconds or press the center navigation key when you are satisfied
with the entered telephone number
Lift the handset to speak privately or remain on speakerphone.
If the headset is enabled, it is automatically used if the handset is not
removed from the cradle
Replace the handset, or press the speaker button to end the call