Denon AVR-2807 User Manual
Page 64
60
ENGLISH
ENGLISH
Advanced Setup – Part 2
Advanced Setup – Part 2
Others Setup
Setting the Room Equalizer Setup
Set the Room Equalizer setting with “All” or “Assign” for each
surround mode.
Press
F
F G
G
to set, then press
ENTER
.
All:
Sets the equalizer for all surround modes.
Assign:
Sets the equalizer individually for each surround mode (
page 24).
Setting the Direct Mode Setup
Set the ON/OFF setting of Room Equalizer, in the case of the
surround mode is in “Direct” or “Pure Direct”.
Press
D
D H
H
to select “Direct Mode Setup”, then
press
ENTER
.
Press
F
F G
G
to set.
When “All” is selected:
Press
F
F G
G
to set.
OFF:
The equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to correct the
effects of room acoustics.
Front:
Adjusts the frequency response of the surround speakers to
match the characteristics of the front channel speakers.
Flat:
Adjusts the frequency response of all speakers to the flattest
response. This mode is suitable for multi-channel music
surround sound sources.
Manual:
Selects the setting value that was set in the “Setting the
Manual Equalizer Setup” (
page 53, 54).
• The equalizer setting of “Audyssey”, “Front” and “Flat” can be
selected after performing the Auto Setup.
• When the speaker set as “None” with the Auto Setup is
changed to on manually, the equalizer of “Audyssey”, “Front”
and “Flat” cannot be used.
• When headphones are connected, the Room Equalizer cannot
be used.
1
2
Press
D
D H
H
to select “Room EQ Setup”, then press
ENTER
.
1
2
3
1
2
3
ON, OFF:
Select “ON” to use the room equalizer, “OFF” if you do not
want to use it.
Press
ENTER
.
3
1
2
Press
ENTER
.
4