Kirby Sentria - Manual (Page 20)

19
BLOWER SET-UP
Your Sentria® system can also be used as a blower. To do so, you must
first remove the Power Nozzle  25 .
NOTE: When using your Sentria system as a blower, you may choose
between the Upright Handle  17 or the Portable Handle  15 .
Turn the power OFF, place the Tech Drive® power assist in
Neutral (see page 7 for details), unplug the unit from the wall
outlet and press the Toe-Touch Control Bottom Pedal  9 all the
way down until nozzle is fully raised. ➤
Canister Cleaner & Attachments
1
UTILITY TOOL
Use to clean carpeting or the floors of cars. ❏
CONTROLLING AIRFLOW WITH THE SUCTION
CONTROL GRIP
Sometimes when using the attachments, vacuuming drapes or delicate
lamp shades, for example, you might wish to control the amount
of suction.
The Suction Control Grip features a valve to control the amount of
suction. Slide the control back and forth until the desired level of
suction is reached.
The Suction Control Grip can be used with or without the
Extension Tubes. ❏
SUCTION CONTROL GRIP PLACEMENT
The Suction Control Grip may be used at the end of the Extension
Tubes for reaching up or at the beginning of the Extension Tubes
for reaching down. ❏