G-Shock GE-2000-1 User Manual
Module no. 2155
2155-1
Module No. 2155
•
Button operations are indicated using the letters shown
in the illustration.
A
L
C
B
•
Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “REFERENCE” section.
ABOUT THIS MANUAL
GENERAL GUIDE
•
Pressing
B
or
C
changes modes in the sequence noted below.
•
In any mode (except for the Alarm Mode), press
L
to illuminate the display.
Recall Mode
Countdown Alarm Mode
World Time Mode
Stopwatch Mode
▲
▲
▲
▲
Alarm Mode
▲
Timekeeping Mode
▲
▲
A
L
C
B
Press
B
.
Press
C
.
Press
C
.
TIMEKEEPING
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The digital times displayed in the Timekeeping Mode
and World Time Mode are linked. Because of this, make
sure you select a “Home City” (the city whose time and
date you are setting), before you set the time and date.
•
When you enter the Timekeeping Mode from another
mode, the Home City code appears first, followed
after a few seconds by the current time.
A
L
C
B
City Code
Day of week
Month – Day
Hour : Minutes
Seconds
PM indicator
Setting the Time and Date
1. In the Timekeeping Mode, hold down
A
until the
seconds digits start to flash.
2. While the seconds digits are flashing, press
B
to reset
the seconds to
AA
.
•
Pressing
B
while the seconds count is in the range of
30 to 59 resets the seconds to
AA
and adds 1 to the
minutes. In the range of 00 to 29, the minutes count is
unchanged.
3. Press
C
to move the flashing in the sequence shown
below to select other settings.
A
L
C
B
Seconds
12/24-Hour
Format
City Code
Hour
Minutes
DST
On/Off
Day
Month
Year
•
See “Daylight Saving Time (DST)” for details on DST On/Off setting.
4. Use
C
to select the city code setting.
5. Use
B
and
L
to scroll through the city codes until the one you want to set as your
Home City.
•
Pressing
B
scrolls forward, while
L
scrolls back through city codes.
•
See “CITY CODE TABLE” for a complete list of available codes.
6. Use
C
to select the hour, minutes, year, month, and day, and make the settings
you want for each.
•
While hour, minutes, year, month, or day is selected (flashing), press
B
to increase
the setting or
L
to decrease it.
•
When the 12/24-hour setting is selected, press
B
to toggle between 12-hour (
12H
)
and 24-hour (
24H
) timekeeping.
7. Press
A
to return to the current time screen.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle your Home City time between DST and Standard Time
1. In the Timekeeping Mode, hold down
A
until the
seconds digits start to flash.
2. Press
C
once to move the flashing to the DST On/Off
setting.
3. Press
B
to toggle Daylight Saving Time (
dst AN
) and
standard time (
dst Aff
).
4. Press
A
to return to the current time screen.
•
The DST indicator appears on the display to indicate
that daylight saving time is turned on.
A
L
C
B
WORLD TIME
The World Time Mode shows the current time in 27
cities (29 time zones) around the world.
•
For full information on city codes, see “CITY CODE
TABLE”.
Entering and Exiting the World Time Mode
In the Timekeeping Mode, press
B
to switch to the
World Time Mode.
•
In the World Time Mode, press
C
to return to the
Timekeeping Mode.
Viewing the Time in Another City
In the World Time Mode, press
B
to scroll forward
through the city codes.
A
L
C
B
City Code
Current time
Current time in
the selected city
Toggling World Time between DST and Standard Time
1. In the World Time Mode, display the city code whose
DST/Standard Time setting you want to change.
•
You can make separate settings for each city code.
2. Hold down
A
for about one second to toggle DST
(DST displayed) and standard time (DST not displayed).
•
The DST indicator appears on the display to indicate
that daylight saving time is turned on.
•
Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
A
L
C
B
DST indicator
STOPWATCH
The Stopwatch Mode let you record elapsed time, lap
times, and split times. The range of the stopwatch is 59
minutes, 59.99 seconds. You can also store lap and split
times in memory.
•
Stopwatch functions are available in the Stopwatch
Mode, which you can enter using
C
.
•
The current time measurement is shown in the upper
display, while the lower display shows the last time
measurement (elapsed time, lap time, or split time).
•
You can use lap time measurement to time how long it
takes to complete a specific portion (such as a single
lap) of a race.
•
You can use split time measurement to time how long
it takes to get from the start to a specific point in a
race.
A
L
C
B
Measurement time
(Minutes' Seconds"
1/100 second)
LAP indicator
Last time measurement
Measuring Elapsed Time
1. Press
B
to start the stopwatch.
2. Press
A
to stop the stopwatch.
•
You can resume the measurement operation by pressing
B
.
3. Press
A
to clear the stopwatch to all zeros.
Switching between Lap Time and Split Time Measurement
While the stopwatch is cleared (all zeros), press
A
to toggle between lap time
measurement (LAP displayed) and split time measurement (SPLIT displayed).
Recording Lap Times or Split Times
1. Select either lap time measurement (LAP displayed) or split time measurement
(SPLIT displayed).
2. Press
B
to start the stopwatch.
3. Press
B
to record the lap and split time.
4. You can repeat step 3 as many times as you want.
5. Press
A
to stop the time measurement.
6. Press
A
to clear the stopwatch to all zeros.